Latest Products https://www.parthmetals.co.in Latest Products Tue, 20 Apr 2021 16:47:55 +0530 en-us https://www.parthmetals.co.in Mild Steel Wire https://www.parthmetals.co.in/mild-steel-wire.htm https://www.parthmetals.co.in/mild-steel-wire.htm Fri, 06 Nov 2020 00:00:00 +0530 Galvanized Iron Strips https://www.parthmetals.co.in/galvanized-iron-strips.htm https://www.parthmetals.co.in/galvanized-iron-strips.htm Fri, 06 Nov 2020 00:00:00 +0530 Options of different material grades Coil ID options of 100mm to 508mm and OD options of 500mm to 1300mm Tensile strength of 28.1-49.2kgf/mm2 Zinc coating weight of min. 60g/m2 Surface treatment options of chemical passivating treatment, oils, passivating oils Galvanized Iron Angle https://www.parthmetals.co.in/galvanized-iron-angle.htm https://www.parthmetals.co.in/galvanized-iron-angle.htm Fri, 06 Nov 2020 00:00:00 +0530 Features: Fine finish Higher strength Reduced maintenance   Sizes: 25 x 25 x 3 mm 25 x 25 x 5 mm 35 x 35 x 5 mm 40 x 40 x 5 mm 40 x 40 x 6 mm 50 x 50 x 5 mm 50 x 50 x 6 mm 65 x 65 x 6 mm 75 x 75 x 6 mm Galvanized Iron Channel https://www.parthmetals.co.in/galvanized-iron-channel.htm https://www.parthmetals.co.in/galvanized-iron-channel.htm Fri, 06 Nov 2020 00:00:00 +0530 Some of the salient features of these steel channels are mentioned below: Rugged construction Durable finishing Rust resistance Galvanised Iron Cable Tray https://www.parthmetals.co.in/galvanized-iron-fastener.htm https://www.parthmetals.co.in/galvanized-iron-fastener.htm Sat, 07 Nov 2020 00:00:00 +0530 Galvanized Iron Rod https://www.parthmetals.co.in/galvanized-iron-rod.htm https://www.parthmetals.co.in/galvanized-iron-rod.htm Fri, 06 Nov 2020 00:00:00 +0530 Galvanized Iron Sheet and Plate https://www.parthmetals.co.in/galvanized-iron-sheet-and-plate.htm https://www.parthmetals.co.in/galvanized-iron-sheet-and-plate.htm Fri, 06 Nov 2020 00:00:00 +0530 Range :0.5 mm To 200 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length available with NACE MR 01-75. Grade :F 5, F 9, F 11, F 12, F 22, F 913 Size 1250 mm x 2500 mm 1500 mm x 3000 to 6300 mm 2000 mm x 2000 to 10000 mm 2500 mm to 10000 mm Manufaturer  :Loyds, Jindal, Tata & Ispat etc Value Added Services Cutting Bending Forging Rolling Annealing Minor Fabrication Galvanized Iron Wire https://www.parthmetals.co.in/galvanized-iron-wire.htm https://www.parthmetals.co.in/galvanized-iron-wire.htm Fri, 06 Nov 2020 00:00:00 +0530 Reasons For Adopting This Technology : Though lead annealing is costlier than oil fired furnace, the softening of wire is better due to uniform penetration of heat throughout the cross section of wire. In oil fired furnace, scaling in wires are formed which are avoided by lead annealing. In oil fired furnace, there is the possibility of oil spot formation which again is avoided in lead annealing. Our products are better rust-resistant because we use world class lubricants. Galvanized Iron Products https://www.parthmetals.co.in/galvanized-iron-products.htm https://www.parthmetals.co.in/galvanized-iron-products.htm Sat, 31 Oct 2020 00:00:00 +0530 Mild Steel Products https://www.parthmetals.co.in/mild-steel-products.htm https://www.parthmetals.co.in/mild-steel-products.htm Sat, 31 Oct 2020 00:00:00 +0530